Showing posts with label Forge World. Show all posts
Showing posts with label Forge World. Show all posts

Friday, June 17, 2011

Death Korps of Krieg: Bombard




I picked up the Bombard before the new IG release provided rules for the Colossus. The mortar is identical, but the Bombard uses the Leman Russ chassis while the Colossus seems to use the Chimera. Forge World provided all the parts necessary for the Bombard- plastic treads and skirts from the Leman Russ, and resin replacements for the hull, mortar, and manipulator arm.

As you can see in the photos, I wound up with a "pebbly" finish on this model. In retrospect I should have re-primed the whole thing, but I was painting a whole armored company "assembly line" style and didn't have the inclination. Overall it came out fine. The manipulator arm was tricky to pose, so I eventually just used thin brass rod to act as both structural support and flexible joints. Since I put the time in to the arm, I went ahead and left the breach unattached so it could be posed either open or closed.

Monday, June 13, 2011

Death Korps of Krieg: Salamander






Another Forge World model. The fighting compartment is the resin conversion component. The remainder of the vehicle is the standard Chimera. I magnetized the auto-cannon in case I want to throw in a heavy mortar instead and make it a Griffon.

Thursday, April 21, 2011

Death Korps of Krieg: Thunderer




This is the Forge World kit...I'm assuming it was a much older model since the casting was primitive to say the least. One giant hunk of warped resin that I wound up having to cook in a pot of boling water for about 5 minutes before it softened enough to be straightened out a bit. Nice looking vehicle, all things considered.

Tuesday, April 5, 2011

Death Korps of Krieg: Vanquisher



And now for something completely different...

The Vanquisher. I foolishly decided to start up a Death Korps army prior to the new Imperial Guard codex publication. On the positive side, I did make the vast majority of purchases from Forge World when the Pound was at a historically low rate vs. the U.S. Dollar. Anyway, I had several Leman Russ chassis available for use, having purchased several in their Apocalypse release boxes.

This is the only one I built with permanently attached sponsons. I have 2 others which only have empty sockets and are therefore not yet ready for prime-time. All the armor in my Krieg list was primed black, then rust followed by salt weathering, Tamiya German Grey, Tamiya Dark Grey...then the usual highlights. I used MIG Pigments on the treads.

My DKoK army armor uses alternating stripes to indicate unit type. The red and white markings indicate main battle tanks in my army. I also use tan and white for transports. Green and white for artillery. The turret is Forge World and is not permanently affixed to the chassis. I'll be posting more variants in the next few days.

Tuesday, March 15, 2011

Tau: Tetra

The Tetra is another example of a nifty looking Tau unit that follows their alien design aesthetic. I love the sleek lines of the vehicle, and find the concept of a "hard top canopy" with open sides to be quite intriguing. It's just a really pretty skimmer.

On the other hand, even though it's a relatively cheap unit, it's also relatively useless. It's stealthy and fast, which balances out it's total lack of armor. It has the same firepower as an infantryman but carries a markerlight. Clearly it is meant as a scout vehicle or forward observer. The problem is it takes up a Fast Attack slot and with only the single markerlight there is hardly anything you can do with it in a regular game. Now, throw it on the board in an Apocalypse game and you can get away with a lot of mischief...

Building the Tetra was quick and mostly easy. The slight warping of the "canopy" was fixed with hot water. I did have to fill in some misaligned moldings, but they were not too bad. The mold release on the Tetra was so bad that I had to sand down every surface to some degree. The pulse rifles mounted on the chin were poorly cast and as a result I simply used leftover plastic rifles from my Fire Warrior stash.

Wednesday, March 9, 2011

Tau: XV88 Broadsides


I've said it before, and I'll say it again- Forge World kits are a crap-shoot. You may get perfection, you may get a pain in the ass. The XV88 is a far superior design to the standard XV8. It's also a far more labor intensive kit to build. The rail cannons were badly warped, the ammo belts would not align, there were mold separation marks that ran deep like valleys... but the design is awesome and the detail is sharp.

So, you take the good you take the bad, you take them all and then you have the Facts of...uh, sorry...got side tracked into a sit com from the 80s.

Immersion in boiling water will help fix the warped pieces and allow you to connect mis-aligned parts. Pinpoint application of superglue and small quantities of Green Stuff will fill bubbles and voids

One other major issue with Forge World kits is the mold release agent they use. Whatever it is, it's industrial strength. It is the only thing I've ever seen to make superglue bead up on application. I've soaked the parts in water, soap, detergent, Windex, alcohol, coke, and Simple Green. Sometimes, no matter how much I try to get the mold release off the part, it just won't go. As a result, I ALWAYS prime Forge World kits. I have a Forge World Vindicator that has a siege shield which I've primed and painted (partially) at least 3 times... and the paint still won't adhere, even after sanding down the part. The only other possibility is that the kits were sold before the resin fully cured and it's either still setting or de-gassing.


Back to the Broadsides...posing the kit is tricky because not only do you have to get the legs in a decent position (you can get a dynamic pose on the 60mm base, but in-game you are better off with the 40mm base), you have to get the arms mounted as well. The arms are trickier than the legs, because the XV88 has under-slung rail cannons which are further supported by auxiliary arms that run between sockets in the rear of the gun and sockets in the lower part of the backpack. That means when connecting the arms you need to take in to account the arm, ammo feed, and auxiliary arm...3 connection points, all at once. It's only slightly nightmare-ish.

When I'd finally assembled and primed the suits, I airbrushed Tamiya Buff over everything, followed by a wash of Devlan Mud and drybrushing of Vallejo Sand. Mechanical bits were painted Chaos Black with Fortress Grey highlights. Red panels were painted Vallejo Vermilion with highlights of Vermilion mixed with Vallejo Flat Yellow. Missile pod details were picked out with Fortress Grey and Skull White highlights.

Bases are medium and fine ballast...unpainted. I ought to go back and add something there. The figures are pinned to the bases using paperclips that run through the lower legs and feet then through the base, under which they hook into "L" shapes secured by superglue. The ankles are insanely delicate and require re-enforcement.

Broadsides are a lot of fun in the game...I've often been tempted to buy another. But no...I must...resist...

Wednesday, February 23, 2011

Tau: Shas O' Rmyr



I got a bit bored with the Tau character options and decided to pick up Rmyr when a relatively large Forge World order was placed. The kit itself was relatively hassle-free, mostly because the rear torso and jet pack components were from the plastic Crisis Suit. Forge World castings are always hit or miss. They're terribly inconsistent and when they're bad they're really bad. Since it's such a crap shoot, I have to take a deep breath any time I place an order. Rmyr had some slight warping and only a few pinholes. Both were easily fixed.

Posing Rmyr was tricky, since the joints have to be bonded using cyanoacrylate or epoxy cements. CA glue leaves less gunk to clean up, but cures very quickly. Epoxy allows for some working time but tends to leave gunk. I have been using CA, but in future may mix and match...using epoxy to join and pose from the torso down, then CA for the arms and feet and head where a faster setting cement would be beneficial.

Painting was straight-forward. Even though my Tau army is based on the Viorla sept, I wanted O'Rmyr to be the actual O'Rmyr and not a "counts as". Therefore I used the standard Tau color scheme. I primed Rmyr with Armory White, then covered most of him with Tausept Ochre. I lightened that up with highlights of Bleached Bone. Red Gore was used for the shield, pads, and other panels. Highlights were made from Red Gore and a touch of Bleached Bone. The black mechanical components were Chaos Black with Fortress Grey highlights. The gold bosses were painted with a mix of Scorched Brown and Shining Gold, followed by Shining Gold, and finally a highlight of Burnished Gold. The plasma guns and shield highlights were painted with gradients of Ultramarines Blue through Ice Blue. The base was a messy mix of Chaos Black with dabs of Scorched Brown, various washes, and a Bleached Bone drybrush. The Astartes standard had some gold on it, and a barely visible wolf's head was picked out with very diluted Bleached Bone.